1. 钢锁式液压顶升 Steel lock hydraulic jacking

钢索式液压提升装置是以液压油为动力，推动液压缸活塞往复运动，使与活塞上端连接的上卡紧机构和与缸体下部连接的下卡紧机构之间进行载荷转换，从而实现提升(或下降)重物的一种新型、特殊的起吊设备。因为选用结构形式为1×7-Φ15.2的高强度预应力钢绞线作为卡紧机构内的承力件，故定名为"钢索式液压提升装置"，以汉语拼音字头"GYT-**型"表示。

一套设备由结构相同的四台液压千斤顶、二台液压泵站和一个电器控制柜等主要部套件组成。组合形式为一台液压泵站驱动二台千斤顶，相互之间用高压胶管及信号电缆连接，组成一个单元，共二个单元。二个单元通过控制电缆与电器控制柜连接，有电器控制柜进行集中控制，既可二组联动，也可以单组运行。系统基本配置为四个千斤顶单元，可通过扩展实现八、十二个单元及多单元同步集群控制。

到目前为止，该设备已完成国内大型建筑和电力建设项目500余项(吊重10-2000t，吊高10-270m)。实践证明，钢索式液压提升装置广泛适用于大型设备的起吊、安装和张紧。

The Steel lock hydraulic jacking device uses hydraulic oil as the power to push the piston of the hydraulic cylinder to replace movement, so that the upper clamping mechanism connected to the upper end of the piston and the lower clamping mechanism connected to the lower part of the cylinder are gradually converted to achieve lifting ( (Or drop) a new type of special lifting equipment for heavy objects. Because the alternative structure is 1×7-Φ15.2 high-strength pre-stressed steel strands as the internal load-bearing parts of the clamping mechanism, it is named ". Steel cable hydraulic lifting device" with the initials of Chinese pinyin" GYT-** type" means.

A set of equipment consists of four hydraulic jacks with the same structure, two hydraulic pump stations and an electrical control cabinet. The combination form is that one hydraulic pump station drives two jacks, which are connected with each other by high-pressure hoses and signal cables to form a unit, with a total of two units. The two units are connected to the electrical control cabinet through the control cable, and the electrical control cabinet is centrally controlled, which can be linked by two groups or run in a single group. The basic configuration of the system is four jack units, which can be expanded to realize synchronous conversion control of eight or twelve units and multiple units.

Facts have proved that the steel cable hydraulic lifting device is widely used for the lifting of large-scale equipment. When installed, the equipment has completed more than 500 large-scale construction and power construction projects (lifting weight 10-2000t, lifting height 10-270m). And tensioned.

产品参数

1.型号系列:GYT-100、GYT-200、GYT-300;

2.主要组成:液压泵站、液压千斤顶、集中控制系统;

3.额定载荷:100t、200t、300t(单台千斤顶额定载荷);

4.额定速度:6-10m/h。

技术特点

1.体积小，重量轻，施工现场占用场地小;

2.起重能力强，可长时间载重悬停;

3.多重保护，整套液压提升设备采用液压系统自锁及夹持器逆向机械自锁等技术，安全可靠;

4.负载升降平稳，冲击力及振动极小;

5.各种工况实现负荷升、降与停留并随时转换;

6.运行平稳，在施工过程中，姿态可进行调整。

应用范围

1.特别适用于大型发电机定子、锅炉大板梁、锅炉汽包、高/中压缸、除氧器、省煤器、余热锅炉模块、烟道尾部组合件、烟囱钢内筒(包括钢平台)、原子能发电站核反应堆压力壳等部件的整体吊装就位，主变压器卸车及就位。

2.输电线路跨江高塔塔头的整体起吊、大型铁塔的倒装组立、大坝水闸的整体提升等。

3.对电视塔、水塔、房架、飞机库等大型网架结构、大型桥梁、化工大型罐体、塔架组合件、大型桥架结构等特大笨重件进行吊装或水平拉运及安装时的斜向张紧有着其他设备无法比拟的优越性。

工程案例

钢索式液压提升装置在电力工程大型设备(包括发电机定子、汽包、主变压器、烟囱钢内筒、余热锅炉模块等)安装施工中取得了成功的应用，并广泛适用于冶金、建筑、化工、市政、桥梁、铁路等领域重大设备的安装。

Product parameter

1. Model series: GYT-100, GYT-200, GYT-300;

2. Main components: hydraulic pump station, hydraulic jack, centralized control system;

3. Rated load: 100t, 200t, 300t (single jack rated load);

4. Rated speed: 6-10m/h.

Technical characteristics

1. Small size, light weight, small space occupied by the construction site;

2. Strong lifting capacity, can hover for a long time;

3. Multi-protection, the whole set of hydraulic lifting equipment adopts hydraulic system self-locking and clamper reverse mechanical self-locking technology, safe and reliable;

4. The load rises and falls smoothly, with minimal impact and vibration;

5. Various working conditions realize load rise, fall and stay and change at any time;

6. The operation is stable, and the posture can be adjusted during the construction process.

Scope of application

1. It is especially suitable for large generator stators, boiler plates, boiler drums, high/medium pressure cylinders, deaerators, economizers, waste heat boiler modules, flue tail assemblies, chimney steel inner cylinders (including steel Platform), nuclear reactor pressure shell of nuclear power station and other components are hoisted into place as a whole, and main transformer is unloaded and put into place.

2. The overall lifting of the tower heads of high towers across the river, the upside-down assembly of large iron towers, and the overall lifting of dam sluices.

3. Hoisting or horizontal pulling and installation of large and bulky parts such as TV towers, water towers, house frames, hangars, etc., large bridges, large chemical tanks, tower assemblies, large bridge structures, etc. To tension has the superiority that other equipment can't compare.

Engineering case

The steel cable hydraulic lifting device has been successfully applied in the installation and construction of large-scale power engineering equipment (including generator stator, steam drum, main transformer, chimney steel inner tube, waste heat boiler module, etc.), and is widely used in metallurgy, construction, Installation of major equipment in chemical, municipal, bridge, railway and other fields.

此项目型号 GYT100,数量150台

此项目特点：采用德国克鲁博技术，由国电电力科学研究院及我们工厂的配合支持完成此次研发。并由我们工厂生产加工。

Model of item:GYT100

Quantity:150 sets

Advantage of Item:Used Germany CLUBS brand technical and The cooperation and support of Guodian Electric Power Research Institute and our factory completed this research and development. And produced and processed by our factory.

证书及产品照片 Certificate and pro

ducts pictureces